Put car into 2nd, then shift into Reverse, pull handbrake (unless brakes are hot), and then shut the engine off. For starting, I put on my belt first (as I found it turns of the dinkle-dink buzzer), clutch in, start, handbrake off, and either back-up or put it in 1st.
Now, my Mustang is a little different for parking.
1. Locate flat area since the car has no handbrake
2. Put car into 2nd, then into Reverse
3. Flip ignition master switch to off
4. Turn fan switch to off
5. Turn guage switch to off (turns off gauge cluster)
6. Turn key to off position
7. Release key back stop and remove key
8. Turn cam-lock to release the belts
9. Climb over the roll bar and get out
10. Cycle battery main cut-off switch to the off position
|